Here I post a few quick links:
Software //github.com/SpacehuhnTech/esp8266_deauther
Hardware //github.com/lspoplove/Deauther-Project
WiKi //github.com/SpacehuhnTech/esp8266_deauther/wiki
FAQ //github.com/SpacehuhnTech/esp8266_deauther/wiki/FAQ
Burning tutorial //github.com/SpacehuhnTech/esp8266_deauther/wiki/Installation
Burning tool //github.com/nodemcu/nodemcu-flasher
Firmware download //github.com/SpacehuhnTech/esp8266_deauther/releases
Please Check out the how-to video link :
//www.youtube.com/watch?v=TMvpJiE8Yy8
Quick product upgrade tutorial:
1. Download CP2102 driver (//www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers)
2. Download the firmware (//github.com/SpacehuhnTech/esp8266_deauther/releases)
3. Download nodemcu-flasher (//github.com/nodemcu/nodemcu-flasher)
4. Click the gear to select the corresponding binfile. The programming mode selects DOUT. The rate selects 961200. Click Flash start and wait for the progress bar to reach the end and then power on
Search Deauther on Github to find the corresponding project. On Github, we have put YouTube video links, WiKi, FAQ, etc., which can basically solve 90% of your problems. You can check the issues of this project for the remaining 10%. You can ask questions in the issues, or you can View answers to the same questions asked by others
Deauther Watch is still an ESP8266 development board, but you can wear it like a smart watch.
I provide 3D print case only for Deauther Watch.
But I do not provide case for old Deauther Wristband.
3D Print Case Download:
//github.com/lspoplove/Deauther-Project/blob/master/3DPrint/DeautherWatch.STL
Assemble Video
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here.
//github.com/spacehuhn/esp8266_deauther
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and hardware info
Display SH1106 1.3 OLED
Display SDA GPIO 5 (D1)
Display SCL/SCK GPIO 4 (D2)
WS2812b LED GPIO 15 (D8)
Button Up GPIO 12
Button Down GPIO 13
Button Select GPIO 14
High Light LED GPIO 16
Side Button GPIO0 GPIO2 RST
Please use computer to see more details
Deauther Watch V2 fixed all the problems I collected. Now hardware has RTC but software will update later. ESP32 does not support deauther.
Update Log
| Difference | Deauther Wristband | Deauther Watch V1 | Deauther Watch V2 |
|---|---|---|---|
| Battery | 500mah | 500mah | 800mah |
| 3D Print Case | No | YES | YES |
| Screen Protection | No | No | YES |
| Battery Indicate | No | No | YES |
| Power Switch | Plastic | Plastic | Metal |
| Charging Current | 0.5A | 0.5A | 0.8A |
| RTC DS3231 | No | No | YES |
| Breakout GPIOs | No | YES | YES |
| Color | Black&Red | Black | Black&White
|
What is it?
Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.
This ESP8266 development board comes with a 800mAh battery, OLED display and a 3-way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit here.
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
GPIOs and hardware info
- Display: SH1106 1.3″ OLED
- Display SDA: GPIO 5 (D1)
- Display SCL/SCK: GPIO 4 (D2)
- WS2812b LED: GPIO 15 (D8)
- Button Up: GPIO 12
- Button Down: GPIO 13
- Button Select: GPIO 14
- High Light LED: GPIO 16
- Side Button: GPIO0,RST
Why did you make it?
I designed this development board especially for Spacehuhn’s great project: ESP8266 Deauther. It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.
What makes it special?
- Only ~80mA power usage
- Up to around 8-10 hours work time
- 800 mA charging current
- Indicate charging LED (25%,50%,75%,100%)
- Included 5dB FPC antenna and 2dB antenna
- Power Switch (Click to turn on, double click to turn off)
- Protection: short, overcharging, over discharging, temperature
- Added Extremely Accurate DS3231
Disclaimer
Use it only for testing and educational purposes against your own devices! I don’t take responsibility for what you do with it.
Please check the legal regulations for your country to make sure you don’t violate any laws.
You can get full information from WiKi
Scehmatic and 3D Print Design files
What is it?
I call it D&B watch. It is a Deauther & Bad USB watch. You can also call it deauther watch V4. You can look Deauther Watch V3 to understand what is deauther.
Why did you make it?
In order to make it more fun. I added atmega32u4(Arduino Leonardo) to this watch. Now this watch not only disconnect wifi but also perform bad usb attack!
What makes it special?
Compare to deauther watch V3:
-
ESP07 changed to ESP07s: With an external 3dB antenna it could search more signal than V3. You can also add bigger antenna to the SMA connector.
-
Added Atmega32u4: I flashed Arduino Leonardo bootloader already. You can program it as bad usb directly.Two buttons(Digital pin 9 and 10) could be used to execute different commands. I flashed a demo program. When bad usb port connects PC, press DP9 button cmd window will be opened. Press DP10 button Notepad will be opened. You can reprogram it via Arduino IDE.
-
Bridge: There are empty solder pads at the back of this watch. You can solder them to connect ESP8266 with atmega32u4. For example if you solder IIC pads this watch could become wifi duck.
-
Battery: 800mAh battery upgrade to 1000mAh. There are more space inside to put bigger battery instead.
-
Strap: Canvas strap upgrade to silicone strap.
-
Design: 3D case has been redesigned. Added bottom arcylic board to pretect this watch.
-
Charging: There are two usbs. Each usb could be used to charge battery. But I do not suggest you use them at the same time.
Deauther Watch SE Descripiton
Difference Deauther Watch SE Deauther Watch V3 Deauther Watch V4 Battery 500mah 800mah 1000mah 3D Print Case YES YES YES Screen Protection YES YES YES Battery Life Indicate NO YES YES Charging Indicate YES YES YES Power Switch Plastic Metal Metal Charging Current 0.5A 0.8A 0.8A RTC DS3231 YES YES YES Breakout GPIOs YES YES YES Color Black Black Black Standby current Low Medium Medium Laser NO YES NO Buzzer YES NO NO Strap Soft sillica gel Nylon Soft sillica gel Work Time 3-4h 7-8h 8-10h Weight 60g 70g 90g Size(LxWxH mm) 60x42x22 60x55x22 80x60x22 WHAT IS IT?
Deauther watch SE has redesigned surface and circuit. RTC could work for several months after you turn off the watch. You can also flash deauth detector software because it has buzzer now.
Deauther Watch is still an ESP8266 development board, but you can wear it like a smartwatch.
It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz.
You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
FUNCTION
- Deauther Attack: Disconnect 2.4G WiFi
- Deauther Beacon: Create fake networks
- Deauther Probe:Confuse wifi trackers
- Packet Monitor:Display wifi traffic
-
GPIOS AND HARDWARE INFO
- Display: SH1106 1.3″ OLED
- Display SDA: GPIO 5
- Display SCL/SCK: GPIO 4
- WS2812b LED: GPIO 15
- Button Up: GPIO 12
- Button Down: GPIO 13
- Button Select: GPIO 14
- Buzzer: GPIO 0
- Side Button: RST
-
WHY DID YOU MAKE IT?
I designed this development board especially for Spacehuhn’s great project: ESP8266 Deauther. It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.
WHAT MAKES IT SPECIAL?
- Double Arcylic Protection
- Transparent Case
- Soft sillica gel strap
- 500 mA charging current
- Indicate charging LED (RED will turn off when full)
- ESP12F Inside
- Power Switch
- Protection: short, overcharging, over discharging, temperature
-
DISCLAIMER
This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!
Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don’t take any responsibility for what you do with this program.
MORE INFO
Deauth
Closes the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don’t use the 802.11w-2009 standard that offers a protection against this attack. Please only select one target! When you select multiple targets that run on different channels and start the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface.
Beacon
Beacon packets are used to advertise access points. By continuously sending beacon packets out, it will look like you created new WiFi networks. You can specify the network names under SSIDs.
Probe
Probe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It’s unlikely you will see any impact by this attack with your home network.
VIDEOS
DSTIKE D&B Watch (V4)
| Deauther Watch SE |
|---|
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- The finest materials and stunning design — all our products are developed with an obsessive dedication to quality, durability, and functionality
- We use the most secure online ordering systems on the market, and are constantly improving our software to make sure we offer the highest possible security
BUY WITH CONFIDENCE
Our mission is to make your shopping experience as safe and enjoyable as possible. Have questions? Feel free to contact our award-winning customer care team for advice on everything from product specifications to order tracking.
- Money back guarantee: Something not quite right? If you’re not totally satisfied with your purchase, you can return it within 15 days for a full refund
- Risk-Free Purchase: We utilize industry-standard Secure Sockets Layer (SSL) technology to allow for the encryption of all the sensitive information, so you can be sure your details are completely safe with us
- Trustworthy payment method: We partner with the most popular online payment solutions that guarantee enhanced security and fast transaction processing
